Ag-Bag MB7010HyPac User Manual
Page 73
S
ETUP
AND
O
PERATING
P
ROCEDURES
23
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
I
NSTALLING
T
HE
A
G
-B
AG
®
B
AG
(
CONT
.)
3d
3e
2
Seal the Beginning End of the
Bag
1. Pull off enough bag to apply
the seal. Pull from the inside
folds, not the outside folds
(white on the outside, black on
the inside). Make sure you pull
the bag under the bag bungee
cord.
2. Seal the end of the bag us-
ing Master Seal
®
. Follow the in-
structions included with the
Master Seal
®
. Master Seal
®
,
tool, and sealing board are
available from your Ag-Bag
®
Dealer.
3. OR, use a Double Knot Tie.
(a) find the end of the bag; (b)
gather the bag to the center; (c)
twist the bag tight; (d) tie the bag
tight. Leave enough bag to fold
over and (e) tie a second time
giving the bag an airtight seal.
4. Slide excess bag back onto the
tunnel and bag pan. Position the
knot knee high.
This illustration shows a bag in-
stalled and ready for use. The
double knot was used to seal the
end of the bag.