Ag-Bag MB7010HyPac User Manual
Page 17
S
AFETY
15
STOP
MACHINE
AND
TURN
OFF
ENGINE
TO
ADJUST
,
LUBRICATE
,
OR
SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 1
C
AUTION
L
ABELS
(
CONT
.)
MAXIMUM TOWING SPEED. Although you can tow the Ag-Bag-
ger on the open highway do not exceed 25 mile per hour. It should
be remembered that the Ag-Bagger
®
does not have brakes, also
the wheels and axles are not bolted to the frame but are held in
place by a pin and hair pin. Under no circumstances should you tow
the Ag-Bagger
®
while the wheels are in the bagging position. Make
sure you read and understand the section on preparing the Ag-Bag-
ger for transit in the Operator’s Manual. The PB6000 has its wheels
fixed in place, this requires that it be towed in the bagging position
and should be towed a lower speed. To replace this decal reorder
part number 1530041 from your Ag-Bag
®
Dealer.
N
OTICE
L
ABELS
Grease rotor
bearing 4 pumps
per bag.
GREASE ROTOR BEARING. The Ag-Bagger
®
is equipped with two Rotor Bearing Grease Whips.
The zerk fittings are located on the frame on either side of the tunnel. For the best results with your Ag-
Bagger
®
use the type grease recommended in the Service and Maintenance portion of the Operator’s
Manual. To replace this decal reorder part number 1530096 from your Ag-Bag
®
Dealer.