Ag-Bag MB7010HyPac - Manual (Page 44)

F
EATURES AND
C
ONTROLS
13 Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 3
Feed Table Adjuster
This adjuster is used for main-
taining the proper alignment on
the feed table belt. There is an
adjuster on either side of the feed
table.
Standard
Cable Anchor
Used to aid in the compaction of
product in the bagging opera-
tions, the cable anchor (shown
in the transport position) is con-
trolled by hydraulics.
Standard
Hydraulic Bag Pan
For ease of operation hydraulics
are used to extend and retract the
bag pan for ease of putting on
bag. Bag Pan is shown partially
open.
Standard
NEED NEW PICTURE