Ag-Bag MB7010HyPac - Manual (Page 80)

S
ETUP AND
O
PERATING
P
ROCEDURES
30 Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
T
OWING
T
HE
A
G
-B
AGGER
1. Using the lift jack raise the Ag-Bagger ®
2. Lineup the towing vehicle with the pintle hitch. Make sure you use a vehicle rated to tow your Ag-
Bagger.
3. Using the lift jack lower the Ag-Bagger ® onto the pintle hitch.
4. Shut off Ag-Bagger ® engine.
5. Connect the Ag-Bagger ® lights to the tow vehicle. The connector should have been installed to the
four wire harness.
6. Attach air brake hose to the Ag-Bagger ® The connector is located above the pintle hitch stabilizer.
7. It is your responsibility to know follow all state and local laws dealing with the movement of agricul-
tural equipment on highways.