Ag-Bag MB7010HyPac - Manual (Page 108)

16
S
ERVICE AND
M
AINTENANCE
STOP MACHINE AND TURN OFF ENGINE TO ADJUST
,
LUBRICATE
,
OR SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 7
Tine Cap Replacement
Tine Cap Replacement
The tine cap can be replace on
the rotor while in the machine.
A. Remove spring pins (1) and
(2) from the cap (3) and tooth (4).
B. Slide the tine cap (3) from the
tooth (4).
C. Slide the new tine cap (3) onto
the tooth (4).
D. Install the spring pin (2)
through the whole in the tine (3)
and tooth (4).
E. Install the spring pin (1) into
spring pin (2).
F. Check the ends of the spring
pins to make sure they are flush
with the tine.
1
2
4
3
1. 1/4 Spring Pin
2. 3/8 Spring Pin 3. Tine Cap
4. Rotor Tooth