Ag-Bag MB7010HyPac - Manual (Page 90)

T
ROUBLESHOOTING
2 Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 6
P
ROBLEM C
AUSE
C
ORRECTION
R
OTOR
D
RIVE
B
ELT
S
LIPPING 1. To much belt deflection.
2. Rotor plugged.
3. Product binding lower beater
bar.
1. Adjust Belt Tension. See the
Service and Maintenance Sec-
tion.
2. Slow down Feed Table belt.
3. Adjust chop or monitor mois-
ture.
F
EED
T
ABLE BELT WON
’
T PULL FEED
TO ROTOR
.
1. Feed to wet and heavy. 1. Remove some feed from belt
to reduce weight.
2. Chain Binding 2. Check for binding and realign
sprockets
3. Too much buildup on belt roll-
ers. 3. Clean belt roller of build up
E
NGINE
E
ND
S
TEERING
W
ON
’
T
T
URN
1. Lock pin locked 1. Remove pin from locked posi-
tion.
2. Other functions running on
engine end. 2. Turn off other functions run-
ning on engine end.
R
OTOR
N
OT
T
URNING
1. Rotor not engaged
2. Tachometer not operating cor-
rectly.
3. Drive belts improperly ad-
justed.
4. Foreign object in rotor
1. Use Rotor switch to engage
rotor.
2. Replace tachometer sensor.
3. Adjust belt tension.
4. Remove foreign from rotor
5. RPM to high. 5. Lower RPM.