Ag-Bag MB7010HyPac User Manual
Page 57
S
ETUP
AND
O
PERATING
P
ROCEDURES
7
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
The Arm Rest console keeps the
bagging operation of your Ag-
Bagger
®
at your finger tips. The
electric over hydraulics keep the
hydraulics out of the cab.
A
RM
R
EST
C
ONTROLS
1. Signal Lights Switch: Press
the top of the switch to illuminate
the green light. Press the bottom
of the switch to illuminate the red
light.
2. Horn Switch: Press and hold
top to sound horn.
3. Rotor Control: Press top of
switch to start rotor and lower
beater bar. Press bottom of
switch to stop them.
4. Beater Bar Switch: Press
top of switch for counterclock-
wise rotation. Press bottom of
switch for clockwise rotation.
Center position of switch will stop
rotation. Controls upper beater
bar only.
5. Diagnostic Gauge: Allows the
operator to view many readouts
of engine functions and trouble
codes. Refer to the your engine
operator’s manual for explana-
tion of these codes.
6. Ignition Switch: The four po-
sition key switch controls the
electrical system. Use this
switch to start and stop engine.
7. Idle Control Switch: Turn
knob clockwise to increase idle
and counter clockwise to de-
crease. Use bottom knob to lock
idle at desired speed.
4
3
2
1
5
6
7
8
9
10
11
12
13
14
15
16