Non-redundant mode, Non-redundant mode -2, Figure 7-1 – ADTRAN 4200659L1 User Manual
Page 136
Advertising
Chapter 7. Circuit and Network Redundancy
7-2
MX2800 STS-1 User Manual
61200659L1-1
NON-REDUNDANT MODE
In Non-Redundant Mode, the MX2800 STS-1 houses only one
controller card and only one network connection is available. There
is no failure protection. In the event of a failure, an alarm is initiated
and the front panel LEDs reflect the condition. See Figure 7-1 for
an illustration.
Figure 7-1. Non-Redundant Mode
MX2800 STS-1
In this mode, the STS-1 must be connected to the
IN
and
OUT
jacks
for
NET A
.
Advertising