Power supply alarms -24 – ADTRAN 4200659L1 User Manual
Page 70
Chapter 3. Configuration
3-24
MX2800 STS-1 User Manual
61200659L1-1
Power Supply Alarms
Alarm
Description
Activity Loss
Status
When enabled, the CRITICAL relay will be
thrown if the Activity Loss Status indicates the
failure of an internal clock. The alarm will remain
active until the condition clears or the alarm is
acknowledged by the user.
Alarm
Description
Malfunction
Power supply card is no longer working. The
unit has switched to the backup power supply or
battery backup.
Power Low
Power supply’s output level is abnormally low.
Power Fail
Power supply card’s input power is lost.
Bat. Backup
Active
Battery charger has lost its AC source and is
now running off the battery backup.
Battery Low
Battery backup has reached a critical energy
point at which it may be unable to supply the unit
with sufficient power to maintain operation.
Temperature
High
Power supply card temperature is above
normal.
Temperature
Critical
Power supply card temperature is so high that it
may suffer damage.