ADTRAN 4200659L1 - Manual (Page 87)

Chapter 3. Configuration
61200659L1-1 MX2800 STS-1 User Manual 3-41
Update via TFTP Server
Select U PDATE VIA TFTP SERVER from the U TILITIES menu. A new
menu displays, allowing you to enter the IP address and file name
of the file you want to download to the unit. Once this information
is entered, select
S TART /S TOP T RANSFER .
Config Transfer
Select C ONFIG T RANSFER from the U TILITIES menu to transfer files to
and from a TFTP server. The C ONFIG T RANSFER option also lets you
save the MX2800 STS-1 configuration as a backup file, so you can
use the same configuration with multiple MX2800 STS-1 units.
Only one configuration transfer session (upload or download) can
be active at a time.
Saving to a TFTP Server
To save current configuration information to a TFTP server, follow
the steps listed below.
1. Set the S ERVER IP A DDRESS field to the IP address of the
machine running the TFTP server program.
If you are using the ADTRAN TFTP server, the IP address
displays in the
S ERVER IP A DDRESS field. For other TFTP
servers, please refer to the appropriate documentation.
2. Change the TFTP Server Filename to a unique filename. This
Before using C ONFIG T RANSFER , the MX2800 STS-1 should have a valid
IP address, subnet mask, and default gateway (if required), and should
be connected to an Ethernet network.