ADTRAN 4200659L1 - Manual (Page 150)

Chapter 9. Transaction Language 1 (TL1)
9-4 MX2800 STS-1 User Manual 61200659L1-1
The MX2800 STS-1 specifically uses “quoted line(s)” in the
response message of successfully executed
RTRV-ALM commands.
The quoted line format is as follows:
The NTFCNCDE field will contain one of the following values:
• MN - Minor
• MJ - Major
• CR - Critical
Refer to the condition types listed in Table 9-2 on page 9-10
(MX2800 STS-1 Alarm Events) for possible MX2800 STS-1
CONDTYPE codes.
Autonomous Messages
The Autonomous message is sent from the NE to the OS and is not
associated with any explicit input message. The MX2800 STS-1
uses this message to exclusively report alarmed and non-alarmed
events. An autonomous message has the following general format:
Possible values for the A LARM C ODE field include:
• *C - Critical Alarm
• ** - Major Alarm
• * - Minor Alarm
• A - Non-alarm
• NULL - (blank)
<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,<OCRDAT>,<OCRTM>,<LOCN>…
<CR><LF><LF>
<SID> <YR>-<MO>-<DAY> <HR>:<MIN>:<SEC><CR><LF>
<ALARM CODE> <ATAG> <VERB>[ <MOD1>[ <MOD2>]]<CR><LF>
(<UNQUOTED LINE>|<QUOTED LINE>|<COMMENT><CR><LF>)+
(;|>)