Write community name, Figure 3-6, Set multiple menu -10 – ADTRAN 4200659L1 User Manual
Page 56: Set cross-connect mapping
Chapter 3. Configuration
3-10
MX2800 STS-1 User Manual
61200659L1-1
To make changes to all VTs, set
F
IRST
to
1
and
L
AST
to
28
. Make
the necessary changes and select
A
PPLY
A
LL
(or select the
A
PPLY
option that corresponds to the change made) before leaving the
menu. To make changes to some of the VTs, set the
F
IRST
and
L
AST
fields to correspond to the lines you want to change. Select
A
PPLY
A
LL
(or select the
A
PPLY
option that corresponds to the change
made). You can now either leave the menu or continue to enter new
F
IRST
and
L
AST
numbers for other lines. Remember to apply the
settings following each change.
Figure 3-6. Set Multiple Menu
Set Cross-Connect Mapping
Any VT can be cross-connect mapped to any available T1/E1 port.
Selecting
U
NEQUIPPED
will free the port and disable the VT. The
default mapping for VTs 1-28 is 1-to-1.