ADTRAN 4200659L1 - Manual (Page 88)

Chapter 3. Configuration
3-42 MX2800 STS-1 User Manual 61200659L1-1
will be the name of the configuration file saved to the remote
server.
3. Select S AVE C ONFIG R EMOTELY .
Retrieving from a TFTP Server
To retrieve current configuration information from a TFTP server,
follow the steps listed below.
1. Set the S ERVER IP A DDRESS field to the IP address of the
machine running the TFTP server program.
If you are using the ADTRAN TFTP server, the IP address
displays in the
S ERVER IP A DDRESS field. For other TFTP
servers, please refer to the program’s appropriate
documentation.
2. Change the TFTP S ERVER F ILE N AME to a unique filename.
Include the complete path. This will be the name of the
configuration file retrieved from the remote server.
3. Select L OAD AND U SE C ONFIG .
Some TFTP servers constrain the format of the filename depending on
the operating system of the server. For example, a TFTP server
running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period, and three extension characters).
Configuration changes will not be implemented until all Telnet
sessions are closed. Loading a new configuration may disrupt
data traffic.