ADTRAN 4200659L1 - Manual (Page 89)

Chapter 3. Configuration
61200659L1-1 MX2800 STS-1 User Manual 3-43
System Reset
The system must be manually reset after downloading new
software. When the unit has successfully loaded and programmed
the new software into its FLASH memory, it will begin uploading
the code to the stand-by controller. This will be indicated on the
menu and the STATUS LED on the stand-by card will display solid
yellow.
Once the upload is complete, the stand-by card will self-reset and
begin running the new code. However, the active card does not
reset automatically. The unit must be reset through the
I MMEDIATE
R ESET or S CHEDULED R ESET T IME functions.
SAVE CONFIGURATION
Commits the current configuration changes to nonvolatile memory.
If this option is not selected after making changes to the
configuration, the unit reverts to its previous configuration when
powered down.
The stand-by card must remain in place until the process is
complete and the STATUS LED is no longer solid yellow.
Removing the stand-by card during the uploading process will
corrupt the software.