Mib ii standard alarm traps -34, Read community name -34, Trap community name -34 – ADTRAN 4200659L1 User Manual

Page 80: Card comm -7

Advertising
background image

Chapter 3. Configuration

3-34

MX2800 STS-1 User Manual

61200659L1-1

MIB II Standard Alarm Traps

Read Community Name

Enter the authentication strings used for SNMP management.
Match the MX2800 STS-1 to the SNMP manager for read
privileges.

Write Community Name

Enter the authentication strings used for SNMP management.
Match the MX2800 STS-1 to the SNMP manager for write
privileges.

Trap Community Name

Enter the identification string used for trap management. This string
accompanies all traps transmitted by the MX2800 STS-1.

Bat. Backup
Active

Battery charger has lost its AC source and is
now running off the battery backup

Battery Low

the battery backup has reached a critical energy
point at which it may be unable to supply the unit
with sufficient power to maintain operation

Temperature
High

the power supply card is getting too hot

Temperature
Crit

the power supply card temperature is so high
that it may suffer damage

Trap

If enabled, the unit issues a trap when...

Cold Start

the unit is first powered up

Link Up

the STS-1 is up with no alarms

Link Down

the STS-1 is in alarm

Auth. Failure

an attempt has been made by an unauthorized
user to access the unit

Trap

If enabled, the unit issues a trap when...

Advertising
This manual is related to the following products: