AMD SB600 User Manual

Page 177

Advertising
background image


©2008 Advanced Micro Devices, Inc.

SMBus Module and ACPI Block (Device 20, Function 0)

AMD SB600 Register Reference Manual

Proprietary

Page 177

Pm1Enable - RW - 16 bits - [AcpiPmEvtBlk:02h]

Field Name

Bits

Default

Description

Reserved 13:11

000b

PciExpWakeDis

14

1b

This bit disables the inputs to the PciExpWakeStatus from
waking the system.

Reserved 15

0b

This register is located at the base address defined by AcpiPmEvtBlk.

PmControl - RW - 16 bits - [AcpiPm1CntBlk:00h]

Field Name

Bits

Default

Description

SCI_EN

0

0b

Selects the power management event to be either an SCI or
SMI# interrupt for the following events. When this bit is set,
then PM events will generate an SCI interrupt; otherwise, it
will be SMI#.

BmRld

1

0b

If this bit is set, SCI is raised whenever there is a bus master
active

GBL_RLS

2

0b

If PM IO x0E bit[0] is set, writing 1 to this bit will generate
SMI# and set PM IO x0F bit[0]. This bit will always return 0.

Reserved 9:3

00h

SlpType

12:10

000b

Defines the sleep state the system enters when the SlpEn is
set to one. This design currently implements 3 states: S1,
S3, and S5

SlpEn

13

0b

This is a write-only bit and reads from it always return zero.
If PM_Reg 04h bit7 SLP_SMI_EN is 0, setting this bit causes
the system to sequence into the sleeping state associated
with the SlpType fields programmed. If SLP_SMI_EN is 1,
setting this bit causes SMI#. Writing 0 to this bit has no
effect. This applies to both P4 and K8 systems.

Reserved 15:14

00b

This register is located at the base address defined by AcpiPm1CntBlk.

PmaControl - RW - 8 bits - [AcpiPmaCntBlk:00h]

Field Name

Bits

Default

Description

ARB_DIS

0

0b

System arbiter is disabled when this bit is set.

Reserved 7:1

00h

This register is located at the base address defined by AcpiPmaCntBlk.

TmrValue/ETmrValue – R - 32 bits - [AcpiPmTmrBlk:00h]

Field Name

Bits

Default

Description

TmrValue

31:0

-

This read-only field returns the running count of the power
management timer.

This register is located at the base address defined by AcpiPmTmrBlk.

CLKVALUE - RW - 32 bits - [CpuControl:00h]

Field Name

Bits

Default

Description

Reserved 0

0b

ClkValue

3:1

000b

These bits define throttle interval for STPCLK# de-assertion
000b: 50%
001b: 12.5%
010b: 25%
011b: 37.5%
100b: 50%
101b: 62.5%
110b: 75%
111b: 87.5%

ThtEn

4

0b

This bit enables clock throttling as set in the ClkValue.

Reserved 31:5

0000000h

Advertising