Agilent Technologies E4438C - Manual (Page 18)

Getting Started
Administration of Service Support Software
1-8
Administration Configuration
Logging on in Administration Configuration supports all administrative functions, including the addition of
new equipment and the installation of test procedures and device drivers.
Administering Service Support Software
1. Refer to the illustration above and fill in the fields in the User Information window:
a. In the User Name field, type in the word Admin. (Case sensitive.)
b. In the Password field, type in the word Falcon. (Case sensitive.)
2. Click OK. (Cancel closes the software application.)
Identifying the Device Under Test (DUT)
When the DUT Selection dialog box is displayed:
1. Make sure that ESG_C is selected in the Select an Instrument Family list.
2. In the Select Model list, select the instrument model of the DUT to be adjusted or tested.
3. In the Serial Number box, enter the complete serial number of the DUT.
4. In the Address box, enter the two-digit GPIB address of the DUT. (To display the address on the signal
generator, press Utility > GPIB/RS-232 . The GPIB Address softkey shows the current address.)