Agilent Technologies E4438C - Manual (Page 39)

Getting Started
Running Service Support Software
1- 29
Printing the Test and Adjustment Results
Once the tests are complete, a dialog box is displayed that asks if you want to print the log file.
The log file is the file in which the test (or adjustment) results are stored. Select the Yes button to print the
test results using the printer connected to LPT1. Choosing the No button allows you to exit the program
without printing the test results.
There are two other methods of printing the test results.
The first method is selecting the Print Log File selection from the File drop-down menu. The software asked
you to define the computer path and file name when the tests were performed. The default directory is the
“log” subdirectory of the destination directory where you installed the software. (C:\HP_SVC\ESG_C\ was
the default destination directory.)
The second alternative method of printing is opening the file in a text editor and printing the file in the text
editor.
Exiting the Software
Exit the software by selecting Exit from the file drop-down menu.
Pressing Alt-F4 on the keyboard is an alternate method of exiting the software.