Agilent Technologies E4438C - Manual (Page 45)

Required Equipment
2- 5
Baseband Generator Agilent E4438C
ESG vector signal generator
with Option 001 or 002,
or
Agilent E4430B thru E4437B
ESG-D Series signal
generator with Option UN8
Digital Multimeter,
Input: Dual Banana Plug Agilent 3458A Option 002
digital multimeter
Option 002 adds a High
Stability Timebase
Digital Oscilloscope,
Input: BNC (f) Agilent 54610B
digital oscilloscope
Measuring Receiver,
Input: Type-N (f) Agilent 8902A
measuring receiver
Audio Analyzer,
Input: BNC (f) Agilent 8903B audio analyzer
with Options 010 and 051
or Options 011 and 050 20 Hz to 100 kHz
Power Supply Use any generic power supply
capable of supplying +15 Vdc
@ 300 mA. +15 Vdc @ 300 mA
Low Frequency LNA,
Input: BNC (f)
Output: BNC (f) Advance Control Components
W50ATC low frequency
low-noise amplifier (LNA)
Advance Control Components
20 Meridian Road
Eatontown, NJ 07724
Phone: (732) 460-0212
FAX: (516) 460-0214
Frequency Range:
100 kHz to 500 MHz
(The LNA is only used up to
10 MHz.)
Gain: 50 dB
Noise Figure: 1.85 dB
1 dB compression minimum:
+5 dBm
High Frequency LNA,
Input: APC 3.5 (f)
Output: APC 3.5 (f)
MITEQ Inc.
AFS3-00010300-18-5P-4 high
frequency low noise amplifier
(LNA)
MITEQ Inc.
100 Davids Drive
Hauppauge, NY. 11788
Phone: (516) 436-7400
FAX: (516) 436-7430
Frequency Range:
50 MHz to 3 GHz (Only used
up to 2 GHz)
Gain: >56 dB (Total gain with
two amplifiers cascaded)
Noise Figure: 1.8 dB
1 dB compression minimum:
+10 dBm
Table 2-1 Required Equipment
Test Equipment Preferred Model
or Alternate Model Critical Specifications