Identifying the dut, Identifying the dut -23 – Agilent Technologies E4438C User Manual
Page 33
Advertising
Getting Started
Running Service Support Software
1- 23
Identifying the DUT
When the DUT Selection dialog box is displayed,
1. Make sure that ESG_C is selected in the Select An Instrument Family list.
2. In the Select Model list, select the signal generator model of the DUT to be adjusted or tested.
3. In the Serial Number box, enter the complete serial number of the DUT.
4. In the Address box, enter the two-digit GPIB address of the DUT. (To display the address on the signal
generator, press
Utility
>
GPIB/RS-232
. The
GPIB Address
softkey shows the current address.)
5. Select the OK button.
Advertising