Agilent Technologies E4438C - Manual (Page 56)

Performance Tests
Overview of Performance Tests
3-8
Next Test Quit running the current test and give it a Fail status. Then, continue testing with the
next test.
Rerun Restart the testing at the beginning of the first test.
Abort Quit testing. Abort all tests.
To begin a performance test sequence with a new DUT, click File and New Session. This allows you to
reselect the DUT, the equipment list, and the performance test list.
Figure 3-5 The Main Test and Results Window
13. When the Service Support Software has run all of the selected performance tests, the status bar indicates
that the tests are completed (item 35).
Printing Results of Performance Tests
1. To print all the results of the entire test sequence, click File and Print.
Exiting this Service Support Software
1. To exit the Service Support Software, click File and Exit.