Agilent Technologies E4438C - Manual (Page 54)

Performance Tests
Overview of Performance Tests
3-6
Figure 3-3 The Select Test Equipment and Tests Window
8. Create a list of performance tests that you want the Service Support Software to run ( Figure 3-3 ):
a. In the Available Tests list (item 13), select a performance test.
b. Click Add (item 14) to add the test to the list of tests that the Service Support Software will run.
You can view the Required Test Equipment list (item 15) for a performance test by clicking on the test
title in the Available Tests (item 13) box.
c. Continue adding performance tests to the list by repeating these steps.
To delete a single entry in the test list, select the unwanted test in the Selected Tests box (item 16) and
then click Remove (item 17).
To delete the entire list of equipment, click Clear (item 18).
9. When you are done, click OK (item 19).
10. To save the test results to a file, make the following selections ( Figure 3-4 ):
a. Click on the Drives window (item 20) and select the drive where you want to save the test results.
b. Click on the Save file as type window (item 21) and select the file type for saving the test results.
c. Click on the File name window (item 22) and type in a name for the test results file.