Agilent Technologies E4438C - Manual (Page 34)

Getting Started
Running Service Support Software
1-24
Selecting Performance Tests, Adjustments, and Test Equipment
When the Select Test Equipment and Tests window is displayed,
1. Select either the Performance Tests radio button to display the list of automated performance tests or
the Adjustments radio button to display the list of automated adjustments.
2. From the list of performance tests or adjustments, select the tests or adjustments that will be performed
on the DUT. Select a test name by clicking on it (the DCFM Frequency Offset Relative to CW test will be
selected for the sections following). The selected test will be highlighted.
Select all of the performance tests or adjustments by selecting the Select All button. Unselect all of the
selected tests or adjustments by choosing the Unselect button.
As each test or adjustment is selected, the test equipment required to perform the test or adjustment is
listed in the Required Test Equipment box. As each test or adjustment is removed from the list, the test
equipment required to perform the test or adjustment is removed from the list. Only the test equipment
for the highlighted tests is displayed in the list.
3. Once the test is highlighted, identify all test equipment listed in the Required Test Equipment box. To
identify test equipment:
a. Select the type of device from the Device Type list.
b. Select the model number from the Model list for the device.
c. Select the device’s serial number from the Available Test Equipment list.
d. Select the Add button to add the device to the list in the Selected Test Equipment box.
The following buttons are available for the Selected Test Equipment box:
Add
Copies the tests and adjustments highlighted in the Available Test Equipment box to
the Selected Test Equipment box.
Remove Removes the highlighted test equipment from the Selected Test Equipment box.
Clear Removes all of the test equipment from the Selected Test Equipment box.