ARRI WRC-1 - Manual (Page 115)

115
If the compensation range available for the shutter
angle is exceeded (e.g. the start shutter angle is
at the beginning or end of the adjustment range),
the READY LED flashes green and the warning
‘ANGLE RANGE’ flashes on the display after
returning to the main menu. The limit values for
the shutter range or the camera speed must be
corrected! The camera can still be started for
test purposes in spite of the flashing warning.
However, the exposure may be incorrect!
• Press the MODE button to go to the next submenu.
To define the adjustment range for the aperture of the
lens, use the SEL and SET buttons and the handwheel,
as described above.
If the compensation range available with the
aperture is exceeded, the READY LED flashes
green and the warning ‘IRIS RANGE’ flashes on
the display after returning to the main menu.
The limit values for the iris or the camera speed
must be corrected! The camera can still be started
for test purposes in spite of the flashing warn-
ing. However, the exposure may be incorrect!
• Press the MODE button to go back to the main menu. Controlling the Camera Speed