ARRI WRC-1 - Manual (Page 154)

154
• Press the MODE button in the main menu to enter the first
submenu. The limit values for the minimum and
maximum camera speed can be defined.
The first display line shows the start value of the
camera speed, and the second line the value at the
end of the ramp.
• Press the SEL button for longer than 2 seconds.
The first digits in the first display line flash.
The required value can now be set using the handwheel.
Press the SEL button again to switch to the next digits.
The first digits are confirmed, and the decimal positions
are set to ‘0’ by pressing the SET button.
The values in the second display line can be set
accordingly.
• Press the MODE button to go to the next submenu. The
limit values for the mirror shutter angle can be defined.
Both the mirror shutter angle and the iris of the lens (if
necessary) are automatically adjusted to compensate
the exposure while the camera speed is ramped.
The two limit values (minimum and maximum shutter
angle) can be selected as required.
Press the SEL button for longer than 2 seconds.
The shutter angle shown in the first display line
flashes. This can now be set using the handwheel.
Press the SEL button again to switch to the next digit.
The first digits are confirmed, and the decimal is set to
‘0’ by pressing the SET button. The values in the second
display line can be set accordingly.
The first display line shows the start value of the ramp,
and the second line the end value.
Controlling the Camera Speed