ARRI WRC-1 - Manual (Page 168)

168
m
ft
h:min
TC UB
fps
end
sec:f bat
3 1 2 4
8 7 6 5
PROG
asy
j am
filter
R
Warnings when programming iris tables
A T-stop has been programmed which cannot be
correct, e.g. T-stop 2.0 cannot lie between 2.8 and 4.
The incorrectly positioned value must be deleted
and reset.
The adjustment range of the iris ring is not compatible
with the selected lens even though it has been re-calibrated.
The selected lens is not compatible with the adjustment
range of the choosen lens.
Use the correct lens,
or select the right lens when programming.
If the device is checked and found to be set properly,
either the end-stops of the lens have probably been reset
or another iris ring has been mounted. In this case, the
lens can be programmed in the user mode (see chapter
5.5.1.2 Programming iris tables for other lenses).
W
a
rnings