ARRI WRC-1 - Manual (Page 128)

128
ramp fps
comp.off
fps
PROG
fps
PROG
PROG
PROG
PROG
5.7.8 Ramp speed /
compensation off
The camera speed is continuously adjusted within the pre-
defined limit values over a pre-defined period of time
after pressing the RAMP button in the camera run (ramp,
definition see Glossary).
Differences in exposure are not automatically
compensated for.
The first line of the main menu shows ‘RA’ to indicate the
ramp function, and the active camera speed in the second
line.
The ‘PROG’ symbol indicates that a time-controlled ramp
function has been selected.
By pressing the SET button, the currently set shutter angle
(if controlled by the WRC-1) can be shown in the first
display line, and the currently set aperture (if controlled
by the WRC-1) in the second display line.
Controlling the Camera Speed