ARRI WRC-1 - Manual (Page 95)

95
The maximum aperture (smallest T-stop number)
corresponds to the selected minimum shutter angle.
• Press the MODE button to go to the next submenu.
To enter the fixed value for the camera speed, use the
SEL and SET buttons and the handwheel.
• Press the MODE button to go to the next submenu.
To enter the ramp duration, use the SEL and SET
buttons and the handwheel as described above.
A previously set ramp duration may now exceed
the technically fastest possible adjustment, if the
ramp duration is simply kept from an old
program. The READY LED then flashes green
and the warning ‘SEC RANGE’ is shown in the
main menu. The ramp duration must be cor-
rected. The camera can still be started for test
purposes in spite of the flashing warning.
However, the exposure may be incorrect!
Note: The shortest possible ramp time is adjusted by
turning the handwheel to the left end-stop. The
maximum ramp time is 100 seconds.
• Press the MODE button to go back to the main menu.
Controlling the Shutter Angle