ARRI WRC-1 - Manual (Page 149)

149
If the compensation range available with the
shutter angle is exceeded, the READY LED flashes
green and the warning ‘ANGLE RANGE’ flashes
on the display after returning to the main menu.
The limit values for the iris, the shutter angle or
the camera speed must be corrected! The
camera can still be started for test purposes in
spite of the flashing warning. However, the
exposure may be incorrect! • Press the MODE button to go to the next submenu.
The limit values for the mirror shutter angle can be
defined using the SEL and SET buttons and the handwheel.
One of the two limit values (minimum or maximum
shutter angle, depending on the adjustment direction
of the camera speed) can be defined; the other limit
value is automatically calculated by the WRC-1.
Press the SEL button for longer than 2 seconds.
Depending on the definable limit value, the shutter
angle value flashes in the first or second display line.
This can now be set using the handwheel.
The automatically calculated other limit value is shown
in the other display line.
Press the SEL button again to switch to the next digit.
The selected shutter angle is confirmed and the
decimal is set to ‘0’ by pressing the SET button.
The minimum shutter angle corresponds to the selected
minimum camera speed.
Controlling the Camera Speed