ARRI WRC-1 - Manual (Page 161)

161
• Press the MODE button to go to the next submenu.
To define the values for the minimum and maximum
shutter angle (if controlled by the WRC-1), use the SEL
and SET buttons and the handwheel, as described above.
The start value of the shutter angle is shown in the first
display line, and the end value is shown in the second line.
• Press the MODE button to go to the next submenu.
To define the values for the aperture of the lens (if
controlled by the WRC-1), use the SEL and SET buttons
and the handwheel, as described above.
The start value of the aperture is shown in the first display
line, and the end value is shown in the second line.
• If the defined values result in a constant exposure, the
display shows ‘CONST LIGHT’ when the MODE button
is pressed. If this reading is not shown, the exposure is
altered during the ramp.
Controlling the Camera Speed