ARRI WRC-1 - Manual (Page 123)

123
camera can still be started for test purposes in
spite of the flashing warning. However, the
exposure may be incorrect!
• Press the MODE button to go to the next submenu.
The limit values for the iris can be defined using the
SEL and SET buttons and the handwheel.
One of the two limit values (minimum or maximum
aperture, depending on the adjustment direction of the
camera speed) can be defined; the other limit value is
automatically calculated by the WRC-1.
Press the SEL button for longer than 2 seconds.
Depending on the definable limit value, the T-stop
display flashes in the first or second display line.
This can now be set using the handwheel.
The automatically calculated other limit value is shown
in the other display line. Press the SEL button again to
switch to the next digit. The selected T-stop is confirmed
and the decimal is set to ‘0’ by pressing the SET button.
The full aperture (smallest T-stop number) corresponds
to the selected maximum camera speed.
• Press the MODE button to go back to the main menu.
Controlling the Camera Speed