ARRI WRC-1 - Manual (Page 39)

39
Note: Depending on the selected function and com-
pensation, this input menu can also be found in
other relevant positions by repeatedly pressing
the MODE button.
In the table submenu, it is possible to:
• load factory- and user-defined iris tables,
menu option ‘TBL LOAD’,
• delete iris tables from the active memory
(factory- or user-defined iris tables
are not deleted),
menu option ‘TBL DEL’,
• edit iris tables,
menu option ‘TBL EDIT’, or
• store user-defined iris tables on one of the 10 available
memory areas.
menu option ‘TBL STORE’.
• The required function is selected using the handwheel
and then activated by pressing the SEL button.
For the Zeiss Ultra Primes, the Variable Primes, the High-
speed set, and the Standard set iris tables are already
programmed in the WRC-1. For other lenses iris tables
can be stored.
10 memory areas are available.
The values of the last lens used may still be
active and stored in the WRC-1.
All settings and the active iris table should
therefore always be checked in order to avoid
incorrect exposures!
Controlling the Iris