ARRI WRC-1 - Manual (Page 61)

61
• Press the MODE button to go to the next submenu.
To define the values for the minimum and maximum
camera speed, use the SEL and SET buttons and the
handwheel. The first display line shows the value for the
left end-stop, the second line shows the value for the
right end-stop.
• If the defined values result in a constant exposure, the
display shows ‘CONST LIGHT’ when the MODE button
is pressed. If this reading is not shown, the exposure is
altered while the handwheel is adjusted.
• Press the MODE button to go to the next submenu. The
table menu has already been described under 5.5.1.
• Press the MODE button to go back to the main menu.
Controlling the Iris