ARRI WRC-1 - Manual (Page 23)

23
• Fasten the console to the support rods so that the
motor unit’s drive gear engages with the gear of the
lens ring. Ensure as little play as possible!
The motor unit CLM-2 can also be mounted directly onto
the support rods without the console.
• Connect the CLM-2 motor to the iris socket of the UMC-1.
Note: All iris-related functions of the WRC-1 are not
available if the CLM-2 motor is not connected.
The WRC-1 then displays the ‘NO IRIS’ warning.
assembly with console
Setup