ARRI WRC-1 - Manual (Page 74)

74
• Press the MODE button to go to the next submenu. To
enter the ramp duration, use the SEL and SET buttons
and the handwheel, as described above.
A previously set ramp duration may now exceed
the technically fastest possible adjustment, if the
ramp duration is simply kept from an old
program. The READY LED then flashes green
and the warning ‘SEC RANGE’ is shown in the
main menu. The ramp duration must be corrected.
The camera can still be started for test purposes
in spite of the flashing warning. However, the
exposure may be incorrect!
Note: The shortest possible ramp time is adjusted by
turning the handwheel to the left end-stop. The
maximum ramp time is 100 seconds.
Note: While the ramp duration is being set, the display
shows the automatically calculated screen time
in the first display line, which corresponds to
the selected projection speed (see the next two
bullet points).
Controlling the Iris