ARRI WRC-1 - Manual (Page 12)

12
3.2 Functions
The WRC/CAM sliding switch is used to select
the operating mode
➪ photo .
3.2.1 CAM mode
In CAM mode, the operator can access the same settings
and modes that are directly available on the camera itself.
The display on the WRC-1 shows the same information as
the camera display.
The MODE, SEL, SET and RAMP buttons have the same
functions as their respective counterparts on the camera.
A RUN LED is also integrated.
In the CAM mode, the OPEN button on the WRC-1 serves
as the PHASE button on the camera.
In CAM mode the WRC-1 serves purely as a camera
remote control unit, without any wider programming options.
The handwheel, the WRC and the COMPENSATION
rotary switches are without function in this operating mode.
WRC/CAM sliding switch
WRC
rotary switch
COMPENSATION
rotary switch
IRIS sliding switch
SET button
RAMP button
SEL button
MODE button
OPEN/PHASE-
button
handwheel
Functions