Decimal positions, Controlling the iris (master value: iris), Using the menus – ARRI WRC-1 User Manual

Page 34

Advertising
background image

34

OFF

ON

IRIS

RAMP

SET/

SEL/

MODE

OPEN

RUN

CAM

WRC

READY

PHASE

,Iris

WRC-1

fps,

Iris

user

max

max

Iris

50%

Iris

off

Iris

fps

fps

ramp

ramp

ramp Iris

PROG

compen

sation

WRC

• Press the MODE button to change from the main menu

to a submenu. Each further press of the MODE button
takes the user to the next submenu, until the main
menu mode reappears.

• In a submenu press the SEL button for longer than 2

seconds to activate the edit mode, in which values can
be defined.

• The flashing digits can be edited using the handwheel.

• By pressing the SEL button the adjusted value is stored

and the next digits are activated. After the last digit
has been entered the edit mode is exited.

If only plain figures are to be adjusted, the decimal positions
can easily be set to ‘0’ by pressing the SET button. The
values for the next line can then be entered.

The submenus cannot be edited while the camera is running.

SEL button

SET button

handwheel

Using the menus

Advertising