ARRI WRC-1 - Manual (Page 88)

88
PROG
PROG
fps
PROG
PROG
ramp <)
comp. off
5.6.4 Ramp shutter angle /
compensation off
The mirror shutter angle is continuously adjusted within
the pre-defined limit values over a pre-defined period of
time after pressing the RAMP button in the camera run
(ramp, definition see Glossary).
Differences in exposure are not automatically
compensated for.
The main menu shows the current mirror shutter angle in
the first display line and ‘RA’ for the ramp function in the
second line.
The ‘PROG’ symbol indicates that the time-controlled
ramp function has been selected.
By pressing the SET button, the currently set T-stop can be
shown in the first display line (if controlled by the WRC-1),
and the currently set camera speed is shown in the
second display line.
Controlling the Shutter Angle