Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 115)

Operation Verification
Commissioning
83
3.5.2 Indoor Unit Verification
To verify the correct operation of the indoor equipment, examine the LED
indicators located on the top panel of the SU IDU and AU IDU units, or on the
front panel of the BS-AU module.
Table 3-7 provides information for the BS-AU IDU LEDs. Table 3-8 lists the LEDs
of the PS1073 IDU.
Table 3-7: BS-AU LEDs
Name Description Functionality
W-LINK Wireless link activity „ Green - At least one SU is associated.
„ Blinking Red - No SU is associated.
„ Off - Wireless link is disabled.
ODU CURRENT
CONSUMPTION
Current Consumption of
the Outdoor Unit
„ Red - over current.
„ Blinking Red - open circuit or below
anticipated current consumption.
„ Green - within tolerance.
ODU STATUS Outdoor Unit Self-test „ Green - Self test passed and ODU
ready for operation.
„ Blinking Amber - Testing (not ready
for operation)
„ Red - fatal failure.
IDU PWR Power indication for the
Indoor Unit
„ Green - IDU power is OK.
„ Off - no power is supplied to the IDU.
ALARM Indoor Unit Alarm
Indication
„ Red - a fatal failure indication.
„ Off - IDU is functioning properly.