Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 128)

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
96
„ Allowed Bandwidth: If more than one bandwidth is allowed, then each
bandwidth is associated with a different sub-band, as the bandwidth may
affect the available frequencies.
„ Regulation Max Tx Power at Antenna Port: The maximum transmit power
allowed at the antenna port of the unit.
„ Regulation Max EIRP: The maximum allowed EIRP (Effective Isotropic
Radiated Power) in dBm, or No Limit.
„ Min Modulation Level: The lowest allowed modulation level.
„ Max Modulation Level: The highest allowed modulation level.
„ Burst Mode: Indicates whether Burst Mode operation is allowed.
„ Maximum Burst Duration: If Burst Mode is allowed, this parameter displays
the upper limit for the Maximum Burst Duration.
„ DFS Option: Indicates whether the DFS (Dynamic Frequency Selection)
mechanism for identification and avoidance of channels with radar activity is
supported.
„ Minimum HW Revision Support: The minimum HW revision required to
support the Sub-Band.
New Country Code files can be uploaded remotely using TFTP (see Appendix B ).
4.2.2.5 Show All Parameters
The Show All Parameters menu is a read only menu that displays the current
values of all status and configuration parameters.
NOTE
The values of some security related parameters, including the encryption Keys, ESSID and
Operator ESSID, are available only with Administrator access rights.
4.2.3 Unit Control Menu
The Unit Control menu enables configuring control parameters for the unit. The
Unit Control menu includes the following options:
„ Reset Unit
„ Default Settings