Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 78)

Chapter 2 - Installation
BreezeACCESS VL System Manual
46
2.3.2.3 Pole Mounting the ODU with the Tilt Accessory
Figure 2-6: New SU-A-ODU Pole Installation Using the Tilt Accessory, Vertical Polarization
To mount the ODU on a pole using the Tilt accessory:
1 Attach the Tilt accessory to the ODU using the two pairs of flat washers,
spring washers and nuts supplied in the Tilt kit.
2 Mount the Tilt accessory on a 1" to 4" pole using two 9/16" metal bands.
3 Release slightly the Tilt Control Screw, tilt the ODU downward/upward as
required, and re-tighten the screw.