Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 141)

Menus and Parameters
Operation and Administration
109
remote FTP server. The Configuration File Upload/Download submenu includes
the following options:
„ Execute FTP GET/PUT Configuration File: The Execute FTP GET/PUT
Configuration File executes the upload/download of a Configuration file or an
Operator Defaults file according to the parameters defined below. The
following options are available:
‘ Execute FTP Get Configuration File (cfg)
‘ Execute FTP Put Configuration File (cfg)
‘ Execute FTP Get Operator Defaults File (cmr)
‘ Execute FTP Put Operator Defaults File (cmr)
„ FTP Configuration File Source Dir: The FTP Configuration File Source Dir
option enables defining the source directory of the configuration/Operator
Defaults file.
Valid values: A string of up to 80 printable ASCII characters. To clear the field
press "."
The default is an empty string.
„ Configuration File FTP File Name: The Configuration File FTP File Name
option enables defining the name of the configuration file to be
uploaded/downloaded.
Valid values: A string of up to 20 printable ASCII characters. An empty string
is not allowed.
The default is config.cfg.
„ Operator Defaults FTP File Name: The Operator Defaults File Name option
enables defining the name of the Operator Defaults file to be
uploaded/downloaded.
Valid values: A string of up to 20 printable ASCII characters. An empty string
is not allowed.
The default is operator.cmr.
„ FTP Server IP Address: The FTP Host IP Address option enables defining the
IP address of the FTP server that is hosting the file.