Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 212)

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
180
The range is from 1 to 60 minutes.
The default is 5 minutes.
4.2.6.4.4 Bridge Aging Time
The Bridge Aging Time parameter enables selecting the bridge aging time for
learned addresses of devices on both the wired and wireless sides, not including
BreezeACCESS VL units.
The available range is 20 to 2000 seconds.
The default value is 300 seconds.
4.2.6.4.5 Broadcast/Multicast Relaying (AU only)
The Broadcast/Multicast Relaying option enables selecting whether the unit
performs relaying of broadcasts and/or multicasts.
The available options are:
„ Disable
„ Broadcast/Multicast Enable
„ Broadcast Enable
„ Multicast Enable
If broadcast/multicast relaying if disabled, these packets are sent only to the
local wired LAN and are not sent back to the wireless link. When broadcast and
or multicast relaying is enabled, the relevant packets (broadcasts only, multicasts
only or both broadcasts and multicasts) originating from devices on the wireless
link are transmitted by the AU back to the wireless link devices, as well as to the
wired LAN.
The default selection is Broadcast/Multicast Enable.
4.2.6.4.6 Unicast Relaying (AU only)
The Unicast Relaying option enables selecting whether the unit performs unicast
relaying. When the Unicast Relaying parameter is enabled, unicast packets
originating from devices on the wireless link can be transmitted back to the
wireless link devices. If disabled, these packets are not sent to the wireless link
even if they are intended for devices on the wireless link. Disable the Unicast
Relaying parameter only if all unicast messages from the wireless link are certain
to be directed to the local wired LAN.
The default selection is Enable.