Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 129)

Menus and Parameters
Operation and Administration
97
„ Change Unit Name
„ Change Password
„ Flash Memory Control
„ Log Out Timer
„ Ethernet Negotiation Mode
„ Change System Location
„ Event Log Menu
„ Feature Upgrade
„ SW Version Download
„ Configuration File Upload/Download
4.2.3.1 Reset Unit
The Reset Unit option enables resetting the unit. After reset, any modifications
made to the system parameters are applied.
4.2.3.2 Default Settings
The Set defaults submenu enables resetting the system parameters to a
predefined set of defaults or saving the current configuration as the set of
Operator Defaults.
The Default Setting options are available only to users with Administrator access
rights.
The available options are:
„ Set Defaults
„ Save Current Configuration As Operator Defaults
4.2.3.2.1 Set Defaults
The Set Defaults submenu enables reverting the system parameters to a
predefined set of defaults. There are two sets of default configurations:
A
Factory Defaults: This is the standard default configuration.