Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 207)

Menus and Parameters
Operation and Administration
175
4.2.6.4.1.5.1 VLAN Relaying Support
The VLAN Relaying Support option enables or disables the VLAN Relaying
feature.
Available selections are Disable and Enable.
The default selection is Disable.
4.2.6.4.1.5.2 Add Relaying VLAN ID
The Add Relaying VLAN ID option enables adding a VLAN ID to the VLAN
Relaying List. One VLAN ID can be entered at a time. The maximum number of
VLAN IDs in the VLAN Relaying List is 20.
Valid values are 1 to 4094.
4.2.6.4.1.5.3 Remove Relaying VLAN ID
The Remove Relaying VLAN ID option enables removing a VLAN ID from the VLAN
ID Relaying List. Valid values are VID values (from 1 to 4094)) that are included
in the VLAN Relaying List.
4.2.6.4.1.5.4 Show VLAN ID Relaying List
The Show VLAN Relaying option displays the values of the VLAN IDs included in
the VLAN Relaying List.
NOTE
If the VLAN ID Relaying List is empty and the VLAN Relaying Support is Enabled, then all data
frames relayed from the wireless link are discarded.
If VLAN Relaying Support and VLAN Forwarding Support are both enabled, then all VLAN IDs
configured in the Relaying List must also be configured in the Forwarding List.
4.2.6.4.1.6 Service Provider VLAN ID (SU only)
The Service Provider VLAN ID is applicable only when the VLAN Link Type
parameter is set to Service Provider Link. It enables defining the Service Provider
VLAN ID for data frames, which identifies the Service Provider VLAN to which the
unit belongs.
The range is 1 to 4094.
The default value is 1.
The Service provider VLAN ID affects frames received from the wireless link port,
as follows:
„ Both single-tagged frames (having Service Provider VLAN ID tag) and double-
tagged frames (having Service Provider VLAN ID and customer VLAN ID tags)
with matching VLAN ID are forwarded to the Ethernet Port (provided the
Ethertype of the tag matches the configured VLAN QinQ Ethertype).