Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 143)

Menus and Parameters
Operation and Administration
111
4.2.4 Basic Configuration Menu
The Basic Configuration menu includes all parameters required for the initial
installation and operation of the unit. After the unit is properly installed and
operational, additional parameters can be configured either locally or remotely
using Telnet or SNMP management.
NOTE
All parameters in the Basic Configuration menu are also available in the relevant sub menus of the
Advanced Configuration menu.
The Basic Configuration menu enables to access the following parameter sets:
4.2.4.1.1 IP Parameters
„ IP Address
„ Subnet Mask
„ Default Gateway Address
„ DHCP Client
‘ DHCP Option
‘ Access to DHCP
Refer to section 4.2.6.1 for a description of these parameters.
4.2.4.1.2 Performance Parameters
„ Maximum Modulation Level (SU)
Refer to section 4.2.6.5 for a description of these parameters.
4.2.4.1.3 Network Management Parameters
„ Wi2 IP Address (SU)
Refer to section 4.2.6.3.8 for a description of this parameter.
4.2.4.1.4 Air Interface Parameters
„ ESSID
„ Operator ESSID Parameters (AU)