Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 199)

Menus and Parameters
Operation and Administration
167
„ VLAN ID – Data (SU only)
„ VLAN ID – Management
„ Service Provider VLAN ID (SU only)
„ VLAN Forwarding
„ VLAN Relaying (AU only)
„ VLAN Traffic Priority
„ VLAN QinQ Protocol Ethertype
4.2.6.4.1.1 VLAN ID-Data (SU only)
The VLAN ID-Data is applicable only when the VLAN Link Type parameter is set
to Access Link. It enables defining the VLAN ID for data frames, which identifies
the VLAN to which the unit belongs.
Valid values range from 1 to 4094.
Default value: 1.
The VLAN ID-Data affects frames received from the wireless link port, as follows:
„ Only tagged frames with a VLAN ID (VID) equal to the VLAN ID-Data defined
in the unit are forwarded to the Ethernet port.
„ The tag headers are removed from the data frames received from the wireless
link before they are transmitted on the Ethernet port.
The VLAN ID-Data affects frames received from the Ethernet port, as follows:
„ A VLAN Data Tag is inserted in all untagged frames received from the
Ethernet port before transmission on the wireless link. The tag includes the
values of the VLAN ID-Data and the VLAN Priority-Data parameters.
„ Tagged frames received on Ethernet port, which are meant to be forwarded to
the wireless link port, are discarded. This includes frames with tagging for
prioritization purposes only.
4.2.6.4.1.2 VLAN ID-Management
The VLAN ID-Management is applicable for all link types. It enables defining the
VLAN ID for management frames, which identifies remote stations for
management purposes. This applies to all management applications using