Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 184)

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
152
4.2.6.2.14.6 Spectrum Analysis Information Display
The Spectrum Analysis Information Display option enables viewing the results of
the last analysis process. The displayed information includes the following details
for each channel:
„ Frequency in MHz
„ Signal Count: The number of signals (excluding OFDM frames with the
correct bandwidth) in the channel.
„ Signal SNR: The average SNR of signals (excluding OFDM frames with the
correct bandwidth) in the channel.
„ Signal Max SNR: The maximum SNR of signals (excluding OFDM frames with
the correct bandwidth) in the channel.
„ Signal Width: The average width in microseconds of signals (excluding OFDM
frames with the correct bandwidth) in the channel.
„ OFDM Frames: The number of OFDM frames with the correct bandwidth
detected in the channel.
„ OFDM SNR: The average SNR (in dB) of OFDM frames received in the
channel.
„ OFDM Max SNR: The maximum SNR (in dB) of OFDM frames received in the
channel.
„ Noise Floor Avg: The average Noise Floor (in dBm) calculated for the channel.
„ Noise Floor Max: The maximum Noise Floor (in dBm) calculated for the
channel.
4.2.6.2.14.7 Spectrum Analysis Information Display - Continuous
The Spectrum Analysis Information Display - Continuous option is available only
when the analysis process is active. It enables viewing the continuously updated
results of the current analysis process. The displayed information includes the
same details available for a regular Spectrum Analysis Information Display
option.
4.2.6.2.14.8 Show Spectrum analysis Parameters & Data
The Show Spectrum analysis Parameters & Data option enables viewing the
Spectrum analysis test parameters and the last test results.