Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 190)

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
158
This setting defines the sector’s topography
„ 0 – LOS: Units have clear line of sight between them
„ 1 – Near LOS: Units have minor obstacles in their path, which are easily
avoidable through multipath
„ 2 – Non LOS: Units are obstructed and the signal must travel through longer
paths or less permisive media
4.2.6.2.19.1.2 Minimum Desired Performance
This setting defines the minimum throughput that must be ensured when
optimizing the achievable distance. Not applicable when the Optimize
Performance for Minimum Desired Distance optimization criterion is used.
The available range is from 500 to 6000 (kbps).
The default is 3000 (kbps).
4.2.6.2.19.1.3 Minimum Desired Distance
This setting defines the minimum achievable distance that must be reached when
optimizing the throughput. Not applicable when the Optimize Distance for
Minimum Desired Performance optimization criterion is used.
The available range is from 500 to 54000 (meters).
The default is 3000 (meters).
4.2.6.2.19.1.4 Channel Selection Optimization Criteria
This setting allows you to select the optimization mechanism that will be
employed:
„ 0 – Optimize Performance for Minimum Desired Distance: Ensures the best
throughput while preserving the Minimum Desired Distance
„ 1 – Optimize Distance for Minimum Desired Performance: Ensures the best
achievable distance while preserving the Minimum Desired Performance
4.2.6.2.19.1.5 Scanning Type
This setting defines the output of the analysis proces performed by the
Interference Mitigation mechanism:
„ 0 – Clear Channel Selection + Automatic Noise Floor Selection: For optimizing
both the operating channel and noise floor level (AU only)