Kramer Electronics WP-501 - Manual (Page 109)

104 K-Config - Adding Actions to a Trigger
9.4 Adding a Panels Status Action
The Panels Status Action type lets you set various parameters on each of the master and auxiliary device buttons.
Note that you can define only one panel status per command.
Figure 188 shows the Panel Status Action Editor. The master device (RC-74DL) and the auxiliary devices front
panels appear on the right side. The left side shows the various actions:

Button Status, see Section 9.4.1

LCD Label, see Section 9.4.2

LEDs Light, see Section 9.4.3

Panel Lock, see Section 9.4.4
Figure 188: Panels Status Action Editor
Note that the availability of the Panels Status actions changes in accordance with the device specifications.
For example, the SV-552 does not have multicolored illuminated buttons, therefore the button status action
is disabled for this device.
i